Aero 48
Features:
-Three-way, large format line array module
-Two 15" loudspeakers with neodymium magnet assemblies
-Four 8" loudspeakers with neodymium magnetic assemblies
-Two neodymium compression driver with 1.5" exit
-Captive rigging system integrated in the cabinet design
-Detachable front dolly panel
The Aero 48 is an externally powered, high efficiency line array module which integrates low, mid and high frequency transducers in a single unit. The rugged, trapezoidal enclosure is easy to transport thanks to the front located dolly panel.
Low frequency reproduction is handled by two 15GN loudspeakers in a bass-reflex configuration. The 15GN speakers incorporate 4" (100 mm) edge-wound flat wire (EFW) voice coils and lightweight neodymium magnet assemblies. Four 8MN16, 8" cone transducers incorporating neodymium magnetic assemblies and 2.5" (62 mm) voice coils are used for mid frequency reproduction. High frequency reproduction is handled by two M-10N medium format compression drivers using a 3" (73 mm) titanium diaphragm, copper clad aluminum EFW voice coil and a 1.5" exit throat coupled to twin SERPIS high frequency plane wave generators.
The D.A.S Aero 48´s trapezoidal shape and rear located splay angle adjusters maintains the front spacing the same, providing the array with a "seamless" front baffle, for improved array performance.
Technical Data:
Frequency Range (-10 dB) 45 Hz-18 kHz
Horizontal Coverage (-6 dB) 90º Nominal
Vertical Coverage Splay Angle Dependent
RMS Power Handling LF: 2 x 600 W
MF: 700 W
HF: 300 W
On-axis Sensitivity 1 W / 1 m LF: 99 dB SPL
MF: 104 dB SPL
HF: 112 dB SPL
Rated Peak SPL at 1 m LF: 137 dB
MF: 139 dB
HF: 141 dB
Nominal Impedance LF: 8+8 ohms
MF: 8 ohms
HF: 16 ohms
Recommended Amplifier Power 4 amps 2 x 1400 W @ 4 ohms
(4 units Aero 48)
Enclosure Material Plywood
Color/Finish Black/Paint
Connectors 2 x NL8 Speakon
Dimensions (H x W x D) 47.5 x 140 x 60 cm
18.7 x 55 x 23.6 in
Weight 100 kg (220 lb)